Implarest® E
Bi-component epoxy resin with active anti-corrosion and solvent agents.
It is formulated to polymerize, with water, it has great adhesion and mechanic resistance.
Additional information
Advantages and Uses
- It ensures the correct anchoring of concrete and cement or resin mortars.
- It has a metal elements passivation action.
- Great resistance to abrasion.
- It polymerizes without retraction even with water presence. Long application life.
- It can be used as bonding bridge between concrete and mortar.
- It can be used as primer for all kind of floors; it guaranties adhesion to the substrate.
- Floors which are going to be conducted on humid substrates.
- Suitable for industrial flooring, loading/unloading ramps, as well as for cement or resin mortar gluing.
Suitable Substrates
- The surface must be dry and clean, free from dust, greases, or spare particles.
- If the substrate is exceptionally smooth or polished, conduct a mile scarified, rusting or a shot blasting process in order to let the primer get into the substrate.
Application Procedure
- Before mixing components A and B, shake component A by mechanic means at very low speed. (< 600 rpm).
- Immediately after pour component B on top of component A and keep moving the mixture for 3-4 minutes more until getting a homogeneous mixture.
- The ratio of the mixture A/B= 80/ 20.
- This product is generally applied using a roller or paint brush.
Recommendations
- Cleaning of the tools will be conducted with solvents immediately after being used.
Packaging and Storage
Two components lot (A+B): 10 kg
- Component A: 8 kg container
- Component B: 2 kg container
- 10 Kg Kits.
- You may keep it for 12 months before expiry date.
Technical data
| Colour | Red / Grey |
| Specific mortar weight | 1.25 gr/cm³ |
| Brookfield viscosity 20ºC | 38- 40 cps. |
| Consumption | 0,3/0.4 kg/m² according to roughness / substrate |
| Solid content | > 80 % |
| Pot Life 20º C | 120 -180 minutes |
| Dry to touch at 20ºC | 6- 7 hours |
| Finished polymerization | 5 days |
| Limited temperature for use | 10ºC minimum |
| Adhesion to concrete | > Own cohesion of the substrate (>2,5 N/mm2) |
| Adhesion to humid substrate | > Own cohesion of the substrate (>2,5 N/mm2) |
| Suitable for vehicles. | 48 hours |
| Compressive strength of concrete. | > 50 N/mm² |
| Elongation to break. | > 1.5 % |
Legal Disclaimer
Instructions given on how to use the product are given based on our tests and knowledge and do not imply any commitment from GRUPO PUMA and do not exempt the user from checking and verifying the products before using them. Claims must be presented with the original packaging to allow an adequate traceability.
GRUPO PUMA is not responsible, under any circumstances, for the application of its products or constructive solutions by the applicator company or other subjects involved in the application and / or execution of the work in question, limiting the responsibility of GRUPO PUMA exclusively to possible damages attributable directly and exclusively to the products supplied, individual or integrated into systems, due to failures in their manufacture.
In any case, the creator of the work project, the technical management or person in charge, or subsidiarity the application company or other possible people involved in the application and / or execution of the work in question, must ensure the suitability of the products. Taking always into account the substrates and any possible pathologies that may occur in the workplace itself.
The values of the GRUPO PUMA products or construction solutions, mentioned in the UNE norm or in any other, exclusively refer to the stipulated conditions. They all refer to specific characteristics on the substrates (humidity, temperature, etc.) without being required for tests obtained under different conditions.