Paviland® ARQ Barniz
Finishing treatment for resin, cement or microcement pavements, which provides a surface, with bacteriostatic efficiency, high impermeability, easy cleaning, high resistance to abrasion and scratching. It highlights and beautifies the pavement. It has good resistance to abrasion and to the marks caused by the pedestrian traffic. It forms, at the same time, an effective bacteriostatic film, which makes it especially recommended both in local and public places.
Additional information
Technical Caracteristics
Product based on resins of polyurethane in watery base
Advantages and Uses
- Good resistance to abrasion and marks caused by traffic.
- Effective bactericidal action that makes it specially recommended both in domestic places (kitchen, bathrooms, etc) and in public places (medical consultations, restaurants, etc).
- PAVILAND ARQ VARNISH film retains flexibility, without cracking, once hardened.
- Facilitates the cleanliness of the pavements. It is recommended for its cleanliness and maintenance the product Neutral Cleaner Multiuses of the range PUMACARE.
- Though the product Paviland Arq is specially designed for the sealed of the systems, also it is valid for its application in pavements of resins epoxide, epoxy - cements, concretes etc…
Application Procedure
- The support must be dry because PU resin is sensitive to moisture.
- Concrete and mortar (28 days at least in the case of concrete) must be completely cured before application.
- The previous implementation of the Paviland Arq Resina primer is recommended.
- Mix both components in the indicated proportion and homogenize.
- Apply with brush or roller of short hair (8 mm), extending well the product.
- it is recommended the application of two hands of product, applying the second one passed between 4 and 12 hours after the first one.
- The cycles of application recommended according to location and the use of the pavement or coating are the following one
| REQUIREMENT | CYCLE |
| Standard cycle | 1 x PAVILAND ARQ RESINA + 1 x PAVILAND ARQ BARNIZ |
| High liquid resistance cycle | 2 x PAVILAND ARQ RESINA + 1 x PAVILAND ARQ BARNIZ |
| Cycle high resistance to abrasion | 1 x PAVILAND ARQ RESINA + 2 x PAVILAND ARQ BARNIZ |
Recommendations
- Supports must be clean, free of dust, fats, oils, liquids, gratty, etc.
- Do not apply with humidity, strong wind or frost.
- Do not apply below 10°C or above 25°C.
- Ensure good ventilation of the room during its application.
- Use gloves and protective glasses during its application.
- In case of spillage gather with absorbent materials as sand or sawdust.
- Product remains of must not be spilt in rivers, sewers, etc
Packaging and Storage
Technical data
(Statistical results obtained under standard conditions).
| Catalysis Reaction | 10/2 |
| Application temperature | 10-25 °C |
| Application | Roller 8 mm / brush |
| Eventual dilution | Diluent Paviland Arq H2O |
| Chemical resistance - physical | Excellent |
| Performance | 80-100 gr/m2 |
| Dry time by dust | 30’ (1) |
| Dry time by touch | 2 hours (1) |
| Useful life | 2 hours (1) |
| Time of repainting | From 4 to 12 hours (1) |
| Sanding time | 12 hours (1) |
| Brightness / opacity | Brightness (LD): 80 gloss / opaque (OP): 20 gloss |
| Coverage | Excellent |
| Cleaning of tools | Diluent Paviland Arq 40 |
Legal Disclaimer
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
Notas
The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.