Pumacril® Decoración Satinada
Satin plastic paint intended for the protection and decoration of walls made with all kinds of mineral materials (concrete, cement, plaster, etc.) both indoors and outdoors.
Additional information
Technical Caracteristics
Coating formulated from aqueous dispersal of vinyl resin, pigments and special additives.
Advantages and Uses
- Excellent cleaning features and resistance to wet rubbing.
- Great whiteness and opacity.
- Weatherproof and UV resistant film.
- Magnificent adherence on exterior and interior vertical walls of plaster concrete and cement-based construction materials.
- Excellent shine retention.
Suitable Substrates
NEW SURFACES
- Remove dust, greases or any other possible contaminants.
- Apply a first coat of FIJAMOR diluted in 2 or 3 parts of water, to make uniform the absorption of the substrate.
- Apply the paint according to the given instructions.
OLD SURFACES
- Remove mould contamination as well as loose parts of paint or other construction materials.
- Level any possible irregularities with a suitable plaster. Let it dry and sand the area.
- Apply a first coat of FIJAMOR diluted in 2 or 3 parts of water, to set and make uniform the absorption of the substrate.
- Apply the paint according to the given instructions.
Application Procedure
NEW SURFACES
- Remove dust, greases or any other possible contaminants.
- Apply a first coat of FIJAMOR diluted in 2 or 3 parts of water, to make uniform the absorption of the substrate.
- Apply the paint according to the given instructions.
OLD SURFACES
- Remove mould contamination as well as loose parts of paint or other construction materials.
- Level any possible irregularities with a suitable plaster. Let it dry and sand the area.
- Apply a first coat of FIJAMOR diluted in 2 or 3 parts of water, to set and make uniform the absorption of the substrate.
- Apply the paint according to the given instructions.
Recommendations
- Do not apply under 5ºC temperatures.
- Do not apply Do not apply with relative humidity higher than 85% or on wet substrates.
- Storage: In its well-closed original container, in cool, dry places in a sheltered place not exposed to direct sunlight, and avoiding exposure to temperatures below 5ºC or above 35ºC.
Packaging and Storage
4 and 15 L containers
Technical data
| ASPECT OF THE DRIED FILM | VALUE | ACCORDING TO SPECIFICATIONS |
| Colour | White | - |
| Finish | semi- matt | UNE-EN 1062-1 |
| 85º shine | 42,4 | UNE-EN ISO 2813 |
| CHROMATIC CORDINATE L* | 95,7 | UNE 48073 |
| CHROMATIC CORDINATE C* | 1,12 | UNE 48073 |
| CHROMATIC CORDINATE h* | 99,6 | UNE 48073 |
| BERGER WHITENESS | 85-88 | UNE 48073 |
| OPACITY | <95% | UNE-EN 13300 |
| PHYSICAL PROPERTIES | VALUE | ACCORDING TO SPECIFICATIONS |
| Density | 1,28 Kg/l | UNE-EN ISO 2811-1 |
| pH | 7,5 | INTERNAL |
| Viscosidad | 80 dPas (50 rpm; Husillo R6) | UNE-EN ISO 2555 |
| Finura dispersión | 20 | UNE-EN ISO 1524 |
| REGARDING ITS FORMULATION | VALUE | ACACCORDING TO SPECIFICATIONS |
| Non-volatile matter content | 50% | UNE-EN ISO 3251 |
| Maximum VOC content allowwed | 30 g/L | 2004/42/II A Classification |
| MAximum VOC content of the product | 30 g/L | 2004/42/II A Classification |
| APLICATION PROPERTIES | VALUE | ACCORDING TO SPECIFICATIONS |
| Theoritical performance | 9-11 m2/L | UNE 48282 |
| Dry touch time | 1 Hour | UNE 48301 |
| Total dry time | 2 Hours | UNE 48301 |
| Thinner | Water | - |
| First hand solution | 10 -15% | - |
| Second hand and subsequent dilutions | 5 -10% | - |
| Repaint interval | 3-4 Hours | - |
| OTHERS SPECIFIC PROPERTIES | VALUE | ACCORDING TO SPECIFICATIONS |
| Web rub resistance | Class 1 | UNE-EN ISO 11998 |
Legal Disclaimer
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.
Notas
The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.