Fijamor
Indicated to improve the adhesion of paints, specially on gypsum, perlite or old substrates.
Informations supplémentaires
Technical Caracteristics
Product based on an emulsion of very short chain acrylic co-polymers.
Advantages and Uses
- Great penetration on the substrate.
- Excellent adherence which favours the application of paint.
- Good homogeneization of substrate.
- Excellent cohesion properties on substrates not very estable or not very solid.
Suitable Substrates
NEW SUFARCES
- Eliminates dust, grease and other contaminants
- Apply FIJAMOR according to instruction for use.
OLD SURFACES
- Eliminate mould stains with a household acid. Also eliminate any paints or remainings of other construction materials.
- Level the surface with a suitable product. Let dry and sand.
- Apply FIJAMOR according to instruction for use.
Application Procedure
- Shake until product is homogeneous.
- Dilute with 2 or 3 parts of water.
- Apply with a brush, roller or a pressure air gun.
- Touch dry: 60 min.
- Clean tools with water immediately after use.
Recommendations
- Do not apply below 5ºC nor above 30ºC., under direct sunlight, rain or risk of frost.
- Store in fresh and dry places.
Packaging and Storage
5 and 25 l bags.
Shelf live: 1 year in sealed original packaging.
Technical data
| (Statistical data obtained under standard conditions) | |
| Solvent | Water |
| Specific weight | 1,03 Kg/L |
| Efficiency | 6-8 m²/L according supports |
| Dry to touch | 60 minutes |
| Time between hands | 8 hours minimum |