Morcemcril^® Fondo

Technical Caracteristics

Product based on acrylic resin, mineral pigments and organic and inorganic additives.

Advantages and Uses

• Good covering.
• Water proof against rain.
• Water vapour permeable.
• Good resistance to substrate alkalinity.
• Good product homogenisation and easy application.

Suitable Substrates

• Substrates must be sound, clean, dry, free from dust, grease, without cracks and loose parxts.
• On low cohesion or very porous substrates, treat before with a layer of FIJAMOR diluted with 2 or 3 parts of water. 

Application Procedure

• Stir the material until perfect homogenisation.
• Can be diluted with 5% with water to match the work conditions and substrate to be primed.
• Tipically a single layer of the product is enough.

APPLICATION TOOLS

• Application can be done by brush, roller or spray, after adequate dilution.
• Protect sourounding areas thoroughly.
• Clean tools with water immediately after use.

Recommendations

• Do not apply at temperatures below 5ºC or above 30ºC, under direct sunlight, rain or risk of frost.
• Do not apply with relative humidity greater than 85% or on wet supports.
• Store in fresh and dry places.

Packaging and Storage

FONDO MORCEMCRIL comes in plastic cans of 25 Kg.
Shelf life: 2 year in sealed original packaging, kept in temperate and dry places, away from direct sun and outdoor conditions. Temperature must be kept between 5ºC and 35ºC. 

Technical data