Morcem^® Texture Resina

Advantages and Uses

• Protection of coatings.
• Good adhesion and sealing capacity.
• It increases the resistance to impact and abrasion providing a finish with great hardness and good flexibility.
• It has a very good waterproofing capacity preventing the emergence of efflorescence.

Application Procedure

• Apply immediately after the surface to be treated has hardened. Spread the product directly by using a spray, endeavoring to leave a uniform film, without an excessive accumulation of the product, and avoiding leaving layers which are too thick.
• It should usually be used pure, although the yield can be increased by diluting the product up to a maximum of 30% with Xylene, naphtha or aromatic hydrocarbons, depending on the condition of the substrate, the specific purpose of the application and the effectiveness of the finish which is wanted.

Recommendations

• Do not apply at temperatures below 5°C or above 35°C.
• Do not apply if there is a risk of frost, rain, strong wind, direct sunlight or if the relative humidity is greater than 85%.
• The product is harmful and flammable under normal application conditions. It is necessary to use the special measures contained in the safety datasheet and to comply, at all times, with the stipulations of the Law on Prevention of Occupational Risks.

Packaging and Storage

25 liter containers.Store in its sealed original packaging, sheltered from weather conditions and humidity, and avoid exposing it to temperatures below 5°C or above 35°C.

Technical data

(Statistical data obtained under standard conditions)