Morcem® Therm Taco de Anclaje
Anchor used to fasten insulation panels in the MORCEM® System.
Informations supplémentaires
Technical Caracteristics
The anchor is made of polypropylene and formed of two elements: nail and sheath.
Advantages and Uses
- Easy to apply.
- Ensures perfect fastening of the panels to the substrate.
- Resistant to oxidation.
- Range of sizes, depending on the thickness of the panel.
Application Procedure
- Using a drill, make a hole in the substrate, going through the insulation panel.
- Hit the anchor with a mallet, so that it penetrates the surface of the panel and fastens the panels.
Recommendations
- The anchor must be at least 30 mm longer than the thickness of the insulation panel.
Packaging and Storage
Boxes with the following format (depending on the length of the anchor):
| 70 mm | 500 units/box |
| 90 mm | 500 units/box |
| 110 mm | 500 units/box |
| 130 mm | 250 units/box |
| 150 mm | 250 units/box |
Technical data
(Data obtained in a laboratory under standard conditions)
| Composition | Polypropylene |
| Weight | Approx. 0.01 kg/unit |
| Dimensions: |
Length (mm) 70 / 90 / 110 /130 /150 Diameter (mm) 10 |