Morcemsec^® Multiusage GP CSIV W0

Technical Caracteristics

Product based on high resistance cement, selected aggregates, and other additives

Advantages and Uses

• To be applied directly on brickworks.
• Masonry works.
• Plaster and stucco works.
• Terrazzo floorings.

Suitable Substrates

• Conventional cement and brickwork based substrates.
• Substrates must be resistant, stable, sound and clean, free of dust, demolding agents, organic products, etc.
• In case of hot or windy weather conditions or when applying over absorbent substrates, it is advisable to wet the substrate and wait till the thin layer of water disappears.
• Do not apply on gypsum or on paint.

Application Procedure

• Add water and mix by hand or mechanically until it takes on an even and workable consistency.
• For plaster works, spread the mortar on the substrate with a trowel and let rest enough time before floating.

Recommendations

• Do not apply below 5¡§¬C nor above 30¡§¬C.
• Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.
• For a thickness of over 1,5 cm, it is advisable to apply the product in two coats.
• In extreme weather conditions (strong winds or high temperatures) it is necessary to water the product with light sprinklers the day after applying it.

Packaging and Storage

25 kg plastic-lined paper bags.
Shelf life: 1 year in sealed original packaging, sheltered from weather conditions and humidity.

Technical data