Niveland^® 3 CT C20 F6

Technical Caracteristics

Product based on special cements, selected aggregates and additives.

Advantages and Uses

• Indoor floor levelling.
• High mechanic resistance.
• High resistance to abrasion.
• Easy to apply.
• Excellent fineness.
• Excellent levelling qualities.
• Up to 3mm thickness.

Suitable Substrates

• Concrete, mortar flooring and similar elements.
• Substrates must be resistant, stable, sound and clean, free of dust, demolding agents, organic products, etc.
• With low-porosity substrates, apply a priming coat (TEXTURE FIX) or improve roughness by mechanical means.
• Before applying the paste, make sure that residual moisture is below the recommended proportion (less than 3%).
• Fill voids or holes (two parts NIVELAND and one part sand). 

Application Procedure

• Add water (5.5 to 6 litres per bag) and mix with a low-speed mechanical mixer (500 rpm approx.) until you have an even and fluid paste.
• Let the mixture stand for 2 minutes and remix.
• The manipulation time of the paste is 20 minutes, depending on the weather conditions.
• Pour the mixed product on the base to be set and spread with a levelling trowel.
• Recommended maximum thickness is 2-3 mm.

NOTE: For greater thickness, mix two parts of NIVELAND with 1 part of  0 to 4 mm silica sand. Mix with 5% less water. The resulting mortar will partially lose its self-levelling capacity. Finish with a layer of at least 3mm pure levelling product.

Recommendations

• Do not apply below 5ºC nor above 30ºC.
• Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.
• Do not apply on humid floors or when there is a risk of humidity.
• Do not add water once it starts to harden.
• Do not apply outdoors.
• On surface areas greater than 20 m², it is advisable to make partition joints (of 6mm minimum), filling them with an elastic material, such as PUMALASTIC PU.
• On surface areas greater than 12 m², it is advisable to do perimeter joints, filling them with an elastic material.

Packaging and Storage

25 kg plastic-lined paper bags .
Shelf life: 1 year in sealed original packaging, sheltered from weather conditions and humidity.

Technical data

(Statistical data obtained under standard conditions)

NOTE: Times shown relate to 23ºC temperature and 50% relative humidity. Such times are shorter at higher temperatures and longer at lower temperatures.