Pumacril Decoración Satinada

Technical Caracteristics

Coating formulated from aqueous dispersal of vinyl resin, pigments and special additives.

Advantages and Uses

• Excellent adherence on vertical and interior facing of concrete, plaster and construction material based on cement.
• Great whiteness an opacity.
• Good resistance to ageing and yellowing.
• Excellent washability and resistance to damp rubbing.

Suitable Substrates

NEW SURFACES

• Eliminates dust, grease and other contaminants
• Apply a layer of FIJAMOR diluted with 2 or 3 parts of water to equalise support absorption.
• Apply the paint according to instructions for use

ANCIENT SURFACES

• Eliminate mold pollution with bleach or other appropriate decontaminant, as well as loose paint pieces or other construction material.
• Level irregularities with appropriate putty.  Leave to dry and sandpaper.
• Apply a layer of FIJAMOR diluted with 2 or 3 parts of water to equalise support absorption.
• The use of hydrofuge sealer is recommended on surfaces in poor conditions, poorly united or with dampness problems.
• Apply the peinture according to instructions for use.

Application Procedure

• Shake until mixture is homogeneous.
• Dilute the first layer between 10-15% of water.
• The second hand and following hands can be diluted up to a maximum of 5% with water.
• Apply with brush or roller if you intend to achieve greater performance and more decorative results.
• Dry to touch time 30 minutes
• Cleaning of tools done with water immediately after use.

Recommendations

• Do not apply at temperatures below 5ºC.
• Do not apply either with relative humidity greater than 85% or on wet supports.
• Stores in fresh and dry places.

Packaging and Storage

4 and 15 L tub.
Shelf life: 1 year in sealed original packaging, sheltered from outside conditions and humidity

Technical data