Implafix

Technical Caracteristics

Product containing synthetic resins, mineral fillers and organic and inorganic additives.

Advantages and Uses

• For indoor and outdoor application.
• Apply on vertical faces and ceilings.
• Primer for waterproofing systems in aqueous media.

Application Procedure

• Mix 2 parts IMPLAFIX with 1 part water.
• Apply the mixture with paint roller or large paintbrush.
• Once dry, apply the mortar.

NOTE: Do not apply the mortar more than three days after applying IMPLAFIX.

Recommendations

• Substrates must be clean, dust free, grease, oil, liquid, demolding agents, etc.
• Do not apply when there is a risk of rain or frost.
• Clean the used tools with water right after its use.
• Do not apply the one-coat mortar if IMPLAFIX is still wet.

Packaging and Storage

5 and 20 kg buckets.

Technical data

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.