Morcemcril^® Mosaico

Technical Caracteristics

Product based on acrylic resins, crushed natural stone, mineral pigments and organic and inorganic additives.

Advantages and Uses

• Ready to use.
• High surface hardness.
• Resistant to weather conditions.
• Resistant to mold and algae.
• Waterproof.
• Permeable to water vapor, allowing the substrate to breathe.
• Quick and simple application.
• Compatible with most substrates.
• Resistant to aging, city atmosphere and UV radiation.
• Excellent adhesion to usual construction surfaces.
• Washable.
• Ideal for dealing with the area of skirting boards (baseboards) and frames around windows and doors in façades.

Suitable Substrates

• Compatible with mineral mortars, concrete, one-coat mortars and plasters.
• TRADITERM external thermal insulation system ready for the application of the final decorative finish.
• Not compatible with fresh lime renders, resins or varnishes, distemper, lime or silicate paints, on substrates that are already painted.
• The supports must be clean, free of dust, loose particles, remains of old paints, oils, fungi, molds and other microorganisms, etc

Application Procedure

• Mix until the material is homogenous.
• The product is ready to use, applications with a stainless steel trowel.
• Spread the product on the substrate, and pass the trowel successively over the applied surface, always in the same direction, to get a flat surface completely covered by MORCEMCRIL MOSAIC.
• Clean work tools with water immediately after use. Remove dry remains with turpentine paint solvent.
• The substrates must be sound clean, free of dust, loose particles, residues of old paints, oils, etc.
• Use FIJAMOR as primer on low cohesion substrates. Always prime with FONDO MORCEMCRIL.

Recommendations

• Do not apply at temperatures below 5ºC or above 35ºC, under direct sunlight, rain or risk of frost.
• Do not apply if humidity is greater than 70%, either in terms of the environment or the surface, nor if it is predicted to rain in the coming days.
• Do not apply on horizontal substrates (floors) or sloped less than 45º.
• Protect the upper part of the render to avoid rain water penetration.
• Being the product’s finish dependent on the mix of its natural composed stones, its results may vary.
• To avoid small colour variations order all the necessary product in a single order and do not mix different batch numbers in a single working area.
• When using spray gun keep pressure, and wall distance constants to avoid finishing variations.
• Low temperatures and high humidity make it harder for the Morcemcril Mosaico to dry, thus lengthening the drying time.
• Protect surrounding areas thoroughly. Clean with water any spillage before dryng.

Packaging and Storage

MORCEMCRIL is sold in 20Kg plastic buckets.

Shelf life: 2 years in sealed original packaging, store in fresh and dry places. Avoid exposure to temperatures below 5ºC or above 30ºC. Sheltered from weather conditions.

Technical data

(Statistical data obtained under standard conditions)

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.