Paviland^® Caucho

Advantages and Uses

• Continuous and flexible pavement
• Children's playgrounds
• Recreational areas
• Grates
• Swimming pool environments
• Sports centers

Application Procedure

BASE COAT OF CRUSHED BLACK RUBBER

• Cement base or stable support.
• Preparation: The support must be clean and stable.
• Primer: It is necessary to apply a primer band TEXTUREFIX-120 or RESINA AGLUTINANTE AROMATICA along the perimeter of the Park and on the legs of the games.
• In a mixer or a bucket, mix (preferably mechanical mixer) black rubber with 9% of RESINA AGLUTINANTE AROMATICA, until it is completely impregnated with resin.
• Demarcate the area with the required height. In case of pavements for playgrounds, the thickness of the coat will be depending on the height of the games, and must comply with regulations EN1177.
• Apply the product with a trowel of steel or similar, compacting it up to equalizing it at a height of the ruler.
• Let´s dry 6 hours

FINISH COAT WITH CRUSHED ENCAPSULATED RUBBER

• To demarcate and create the different decorative zones, it is recommended to use a semiflexible naked cable of copper, to delimit the colors during the application. The cable will have to be fixed to the rubber base with a few metallic hooks. 
• Mix the encapsulated rubber (colored) with 12% of RESINA AGLUTINANTE AROMATICA or  RESINA AGLUTINANTE ALIFATICA.
• Apply the product and compact it with the same steel trowel until the height of the cable (1 cm).
• Once applied the whole surface, it is recommended to finish the compaction with a gardening roller After 6 hours, it will be possible to pass along the pavement.

Packaging and Storage

Bags of 25 kg.

Technical data

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.