Traditerm^® Anclaje Espiral

Technical Caracteristics

Polyamide

Advantages and Uses

• Easy to apply.
• Does not generate thermal flow deviations. 
• For fixing light elements to the TRADITERM® System.

Application Procedure

Once the TRADITERM® System has been applied, on the points where you want to install the light element:

• Position the washer in the threaded point of the spiral anchor and support it over the surface of the system.
• With the aid of a drill, press and insert the Spiral Anchor.
• For the posterior fixing of loads, use exterior Ø type 4-5 mm screws.

Recommendations

• The Spiral Anchor should be fitted after the TRADITERM® System has been applied.
• No pre-drilling is necessary for fitting.
• Maximum Load: 5 kg/unit.

Packaging and Storage

Bag of 10 units.

Technical data

(Results obtained in a laboratory under standard conditions)

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.