Traditerm® Malla
TRADITERM® MALLA consists of double weave threads, essential for reinforcing the TRADITERM® panels. Recommended in the application of TRADITERM® exterior thermal insulation systems. Giving the system greater resistance and stability, and preventing the appearance of cracks caused by temperature differences or movement of the insulation panels. Excellent traction resistance and improves impact resistance.
Additional information
Technical Caracteristics
TRADITERM® MALLA is made of fiberglass threads, which are wrapped in a resin, which protects them from the attack of cement mortar alkalis.
Advantages and Uses
- Easy to apply.
- Fire resistant.
- Crack resistant.
- Excellent traction resistance.
- Good flexibility.
- Improves shock resistance.
Application Procedure
- Apply like a sandwich. To do so:
- Apply a first layer of TRADITERM® mortar onto the support.Place the mesh so that it is slightly embedded.
- Apply a second layer of TRADITERM® mortar to completely cover the mesh.
Recommendations
- In areas exposed to impact, reinforce the panels by using a double TRADITERM® MALLA, or with a first cap of TRADITERM® MALLA DE REFUERZO and a second cap of TRADITERM® MALLA
- The encounters between meshes must be overlapped a minimum of 10cm.
- Singular points such as vertices of facade openings must be reinforced with TRADITERM® MALLA a minimum of 24 hours after fixing the panels.
- Handling this product does not require special care, although, it can cause irritation to very sensitive skin. If this should happen, wash with sufficient cold water and soap.
Packaging and Storage
1,10 m x 50 m rolls .Shelf life: Store vertically in a dry place protected from exposure to the sun.
Technical data
(Statistical data obtained under standard conditions)
| Composition | Fiberglass |
| Screen size | 3.5 X 3.8 ± 0.5 mm |
| Mesh minimum weigh | 160 gr/m2 ± 10% |
| Tensile strength |
Weft ≥ 1900N/5 cm Warp ≥1900N/5 cm |
| Thickness | Aprox 0.58 ± 0.2 mm |
| Chemical resistance | Good resistance to alkalis |
| Reaction to fire | F |
| % Content of organic compounds | 20 ± 4 |
Notas
The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.
PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.
It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.
In the event of a claim, the original packaging must be provided to ensure proper product traceability.
Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.