Traditerm^® Perfil arranque aluminio

Technical Caracteristics

Aluminum profile.

Advantages and Uses

• Easy to apply.
• Marks the start of the TRADITERM® System.
• Protects and reinforces the base of the TRADITERM® System.
• Serves as a guide for aligning the insulation panels.
• Range of thicknesses to choose depending on the thickness of the insulation panel used

Application Procedure

• On the support, draw a level line, on which the TRADITERM® PERFIL DE ARRANQUE will be screwed. The minimum distance between the starter profile and the ground must be ≥ 15 cm.
• The logs that fix the starter profile to the support are placed 30cm apart from each other. The first screw should be placed at a distance of less than 5 cm from the edge of the profile.
• If the surface (on which the starter profile is screwed) is uneven, use profile spacers behind the starter profile, at the points where it is screwed, in order to level the starter profile surface.
• When starting profiles meet, there should always be a separation distance of 2 to 3 mm. This separation can be achieved by using starter profile connectors.

Recommendations

• At joins between profiles, leave a separation distance of 2 to 3 mm.
• To fasten the profile, apply a screw every 30 cm.
• The fastening should always be at a distance of less than 5 cm from the edge of the profile.
• The thickness of the starter profile is the same as the thickness of the insulating panel.
• The meeting of the support with the TRADITERM® PERFIL DE ARRANQUE must be sealed by
  PUMALASTIC MS.

Packaging and Storage

Batches of 10 units at 25 linear meters.
The profiles have to be stored horizontally.

Technical data

(Data obtained in a laboratory under standard conditions)

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.