Traditerm^® Perfil Junta Dilatación

Technical Caracteristics

PVC profile with anti alkali fibreglass mesh and flexible band.

Advantages and Uses

Profile designed as a solution for existing expansion joints in the substrate where the external TRADITERM® Exterior Thermal Insulation Systems (SATE/ETICS) is going to be installed.

Application Procedure

• Apply MORCEM® THERM mortar over the insulation plates positioned on both sides of the expansion joint.
• Position the fibreglass meshes over the mortar so that the profiles forming these elements are positioned over the corners parallel to the insulation plates forming the joint, in order that both reinforce the corner points of the expansion joint.
• Introduce the elastic band inside the expansion joint.

Recommendations

• Do not clad the existing expansion joints in the substrate with insulation plates. Use the expansion joint profile to resolve this particular point. 
• Once the profile has been positioned, leave it to dry for at least 24 hours. 

Packaging and Storage

Boxes of 25 units. The profile must be stored horizontally.

Technical data

(Statistical data obtained under standard conditions)

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.