Traditerm^® Perfil Ángulo Arco

Technical Caracteristics

PVC profile with fibreglass mesh with anti-alkali treatment.

Advantages and Uses

• Perimeter reinforcing in arcs and circular gaps.
• Fast and easy to apply.
• The profile can be easily folded and adapted to the curvature of the edge that needs to be reinforced. The minimum curvature diameter is 1m.

Application Procedure

Apply Traditerm mortar layer on both the surfaces that define the edge, from the profile to the mesh. Place the  TRADITERM® PERFIL ÁNGULO ARCO
on top of the mortar, following the curvature made by the corner that requires reinforcement and press gently. Cover the upper face of the profileprofile and the mesh with Traditerm mortar.

Recommendations

Once the profile has been placed, let it dry for 24 hours minimum.

Packaging and Storage

50 units box->125 lineal meters.
profile should be stocked up in horizontal position.

Technical data

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.