Traditerm^® Perfil Ángulo Circular

Technical Caracteristics

PVC profile with fibreglass mesh with anti-alkali treatment.

Advantages and Uses

• Corner reinforcement that does not form straight angles.
• Easy to apply.
• Reinforcement for corners and gaps in TRADITERM Systems (SATE/ETCS).
• The incorporation of the mesh to the profile makes the execution of the corner faster.

Application Procedure

Apply Traditerm mortar layer on both the surfaces that define the edge, from the profile to the mesh. Place the profile on top of the mortar and press gently. Adapt the profile opening to the angle of the edge. With the help of a level, place the profile correctly. With the surplus Traditerm mortar, resulting from pressing the profile with the trowel, cover the mesh and the profile. Even if the mesh is fully covered, the grids should be marked.

Recommendations

• Where profiles meet, leave a distance of at least 1 to 2 mm of separation.
• Joints between profiles should not coincide with joints between insulation panels.
• Once the profile has been placed, let it dry for 24 hours minimum.

Packaging and Storage

50 m box

Technical data

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.