Traditerm^® Perfil Ángulo PVC con Malla

Technical Caracteristics

PVC profile with fiberglass mesh with anti-alkaline treatment.

Advantages and Uses

• Easy to apply.
• Reinforcement of corners in the TRADITERM® System.
• The incorporation of the mesh into the profile, makes it quicker to do the corner.

Application Procedure

• Apply a coat of TRADITERM® mortar on the two surfaces that make up the corner, over an area that includes the profile and the mesh.
• Then place the profile on the mortar and press gently.
• With the help of a level, position the profile correctly.
• Cover the top surface of the profile by applying TRADITERM® mortar.

Recommendations

• At joins between profiles, leave a separation distance of 1 to 2 mm.
• Its important to avoid that the joints between the profiles coincide with the joints between the insulation panels
• Once the profile is installed, leave to dry for at least 24 hours.

Packaging and Storage

Boxes of 100 units at 250 linear meters.

Technical data

(Data obtained in a laboratory under standard conditions)

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.