Traditerm^® Perfil Terminación Ventana

Technical Caracteristics

PVC profile with anti-alkali fibreglass mesh.

Advantages and Uses

• Easy and quick to apply.
• Connection profile  for the Traditerm Systems (EWI/ETICS) with door and window frames.

Application Procedure

• Apply a layer of TRADITERM mortar over the surface of the insulation panel adjacent to the window or door frame.
• Fix the profile supporting the mesh over the mortar and the rest of the profile over the frame.
• Softly press the mesh over the mortar with a trowel and cover the mesh with the excess mortar.
• The profile has a strip of self-bonding plastic which is used for provisionally fixing a protective paper to avoid dirtying the carpentry during the application of products. Its use is optional. Once the application has been completed, remove the plastic strip by pulling it.

Recommendations

• Once the profile has been positioned, leave it to dry for at least 24 hours.
• Use the protective mechanism to avoid staining the carpentry.

Packaging and Storage

Boxes of 30 units to 72 linear metres.
The profiles must be stored horizontally.

Technical data

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.