Repair mortars

Morcemrest® SR 50

Class R4 mono - component high performance repair mortar suitable for large thicknesses.

Formulated with sulphate resisting cement.

See data sheet


Morcemrest® EF 50 R4

High resistance monocomponent R4 repair mortar for large thicknesses.

See data sheet


Morcemrest® Repair

R4 high resistance mono-component mortar for thick applications.
Formulated with Sulfo-resistant cement, selected aggregates and additives; reinforced with fibres.

See data sheet


Morcemrest® MH R4

Self-compacting high-resistance fluid mortar and balanced retraction.

See data sheet


Morcemseal Todo 1

Thixotropic mortar of high strength, with fiber  for concrete  repair and protection , based on nano-silane technology . Classification R4

See data sheet


Morcemrest® C5 R3

One-component, cosmetic R3 repair and surface leveling mortar.

See data sheet


Morcemrest® RF 15 R3

Medium resistant monocomponent R3 reparation mortar.

See data sheet


Morcemrest® RF 35 R3

R3 mono-component medium resistant repair mortar.

See data sheet


Morcem® Rápido R1

Dry mortar. Designed for usual and ordinary masonry applications in which a rapid and high performance mortar is required.

See data sheet


Morcemrest® Obturador

Rapid setting cement prepared. To block water leaks in concrete cracks or fissures on other base-cement surfaces.

See data sheet


Structural reinforcement

Tejido Carbotec

The Tejido Carbotec System is composed of a unidirectional carbon fiber fabric wrapped in a weft of glass thread covered with thermoplastic material that allows to maintain the position of the carbon fibres during its implementation. It is supplied in rolls of different widths and lengths.

See data sheet


Lámina Carbotec

Lámina Carbotec are manufactured using a pultrusion process from carbon fibre filaments arranged in an epoxy resin matrix. There are three types of sheets available: one with a 170 GPa elasticity module (being the most popular, low module: LM), 200 GPa (of High module: HM) and 250 GPa (of a very high module, used in special applications: UHM).
 

See data sheet


Conector Carbotec

Cylindrical bar of carbon fibre threads of high mechanical strength for the anchoring and structural connection of the CARBOTEC systems and the concrete to be reinforced.

See data sheet


Adhesivo Carbotec Impregnante

Carbotec impregnante adhesive is a resin which, due to its impregnation and thixotropy allows the adherence of the carbotec tissue on concrete elements, reinforced concrete or brickwork.

See data sheet


Restoration mortars

Morcemrest® Mur R CSII

Repair mortar for treating rising damp in skirting boards, facilitating the evaporation of water retained in the wall.

See data sheet


Filling and anchorage mortars

Morcem® Grout 500 Plus

High-strength mortar for filling and anchorage of machinery, leveling supports and bridges, etc.Medium and thick layers.

See data sheet


Morcem® Grout 500

High-strength mortar with self-leveling controlled expansion and no retraction.Medium and thick layers.

See data sheet


Morcem® Grout 30

High-strength, self-leveling mortar with no retraction for filling and precision anchorage in thin layers of 5 to 30mm.

See data sheet


Morcem® Geogrout

High-conductivity grout for pumping, injecting and filling in geothermal plant heat exchangers.

See data sheet


Waterproofing

Morcem® Elastic PM Transparente

MORCEM ELASTIC PM TRANSPARENTE, is a transparent and aliphatic polyurethane resin that, once cured, creates a continuous, elastic membrane, without joints or overlaps, totally watertight and waterproof.
It can be applied by brush or roller.

See data sheet


Geotextil PU

GEOTEXTIL PU 100 / 50 g is a non-woven polyester fabric of 100 / 50 grams, developed with “H2O technology”, used for reinforcing “Morcem Cover” systems.

See data sheet


Morcem® Dry F

Bicomponent flexible mortar for concrete waterproofing.

See data sheet


Morcem® Dry SF Plus

Impermeable mortar of two-components additives for the execution of impermeable coatings.

See data sheet


Morcem® Dry SF

Waterproofing mortar. Semi Flexible.

See data sheet


Morcem® Dry R

Mortar with special additives, for watertight cladding jobs.

See data sheet


Morcem® Dry PU

 Morcemdry PU is a two-component semi-elastic cladding of polyurethane free from solvents. It provides polyurethane waterproof elastic claddings of great thickness and great resistance to abrasion and acids / diluted alkali.

See data sheet


Restoration line primers

Implarest® EPW

Two-component water-based epoxy primer/ bonding bridge for preparing damp and dry surfaces.

See data sheet


Implarest® C

Corrosion protection for steel reinforcements from the Morcemrest restoration system, in compliance with EN 1504-7. This product can be combined with other repair mortars from the Morcemrest range. Cementitious anti-corrosion mono-component primer, modified with polymers for protecting reinforcement. When mixed with water a grout is obtained which is applied to the previously cleaned steel. Due to its high pH level Implarest C creates a passivation layer on the surface of the reinforcement, halting the corrosion process. Implarest C is a corrosion protector classified in compliance with EN 1504-7.

See data sheet


Implarest® EP

Epoxy 100% solid, two-component adhesive, specially formulated for bonding new and old concrete. Once mixed a semi-fluid liquid is obtained which may be applied above 10ºC. It can be used as protection barrier of the steel of the reinforced concrete. It will be applied on the clean reinforcement.

See data sheet


Implarest® PU

Implarest PU is a two-component semi-elastic cladding of polyurethane free from solvents. It prepares the surface for the application of water repellent claddings of great thickness and great resistance to abrasion.

See data sheet


Restoration line miscellaneous

Bandtec

Transverse butyl deformable cold adhesive strip, composed of a visco-elastic layer covered by a non-woven fabric, resistant to alkalis. Theupport allows adaptation to the shape of the substrate and is highly recommended for specific applications of MORCEM® ELASTIC PM liquid polyurethane, and for elastic cementitious waterproofing systems. 

See data sheet


Morcemrest® Epoxi T

Two-component thixotropic epoxy adhesive; like multipurpose adhesive for most construction materials; suitable for filling joints, cracks and small holes.

See data sheet


Morcem® Renovex

Product indicated for the regularisation of vertical surfaces with plastic or paint coatings (except for silicates or polyurethanes), concrete, stuccoed walls or mortar or ceramic plastering.

See data sheet


Morcem® Ultra Rápido

Fast-setting binder. Designed as a setting and hardening regulator for making fast-setting mortars with high strength and dimensional stability.

See data sheet


Pumafix TQV

2-component fast curing vinylester injection resin.

See data sheet


Pumafix TQP

Injection resin for anchorage, 2-component and fast curing, resin-based polyester. Styrene-free. Multifunctional, for solid or hollow substrates.

See data sheet


Pumalastic MS

High-performance, one-component, neutral and elastic filler for sealing and bonding.

See data sheet


Pumalastic PU

One-component polyurethane-based filler for sealing or bonding.

See data sheet


Malla Drypool

Morcem®Dry Mesh consists of double weave threads, essential for the reinforcing. 

Recommended in the application of swimming pool waterproofing systems as DryPool. Gives the system great resistance and stability, and prevents  the appearance of cracks caused by temperature differences or movements.

See data sheet