Implarest^® PU

Advantages and Uses

• It can be used as primer for the elastic cladding Morcemdry PU for water tightness treatments over concrete or mortar substrates,  such as dams, canals, tanks or decanters. 
• Safe drinking water deposits.
• Great adherence to the substrate.
• Negative pressures resistance.
• Impermeability.
• Abrasion resistance.

Suitable Substrates

Surfaces to be treated should be clean, without grease and dust in order to obtain an adequate adhesion.  It is advisable to apply a pressure drip of sand or water (200 atm), which can also be sometimes replace by a mechanic or manual brushing / milling, etc.

Application Procedure

• Stir each component before mixing them to remove grounds.
• Mix completely  component B  with component A. This will ensure that the volume proportion between component A and component B is correct.
• Stir with an electric mixer at low speed (less than 600 rpm) for 4 to 5 minutes, until getting a homogeneous product.
• The product is generally applied by brush or roller and if used as a primer can be diluted between 5-10% with xylene (depending on the porosity of the support). It can also be projected and for this it is necessary to dilute it between 10-15% with xylene (consult with the technical department).

Recommendations

• Every mixing and application equipment should be cleaned with solvents.
• Tools should be cleaned while the product is still fresh before it polymerizes.
• Please consult our Technical Department for any other application method which has not been specified in this data sheet.
• For any information regarding the safety in handling, transportation, storing and use of the product please consult the tag and the updated version of the Safety Data Sheet of the product.

Packaging and Storage

10 kilos kits.

Implarest PU should be stored  in it original packaging and in a dry place. Keep it between 5ºC and 30ºC. Once it has been open it should be used as soon as possible, as it considerably reduces its shelf life.

Shelf life: 1 year.

Technical data

Notas

The information and instructions in this datasheet are based on our current tests and technical knowledge. They are intended as general guidance and do not constitute a binding commitment by PIDILITEPUMA MEA CHEMICALS LLC. It is the sole responsibility of the user to verify, prior to use, that the product is suitable for the intended application and to ensure that it is applied correctly and in accordance with applicable regulations and good industry practice.

PIDILITEPUMA MEA CHEMICALS LLC cannot control how its products are applied on site throughout the entire project and therefore cannot accept responsibility for their application by contractors or other parties involved in the execution of the work. Support visits to the jobsite by our technical staff do not change that. Our responsibility is limited exclusively to defects that can be directly attributed to the supplied products, whether used individually or as part of a system, caused by manufacturing defects.

It is the responsibility of the project designer, site manager, contractor, or other relevant professionals to ensure that the selected products are appropriate for the specific project, taking into account their properties, the substrate, site conditions, and any existing issues.

In the event of a claim, the original packaging must be provided to ensure proper product traceability.

Any performance values stated for PIDILITEPUMA MEA CHEMICALS LLC products or construction solutions, whether in UNE standards or other applicable standards, are based solely on the specific test conditions defined in those standards (such as substrate type, temperature, and humidity). These values may not apply to situations where products are tested or used under different conditions.