Pumacril Revestimiento Elastómera
HIGH ELASTICITY waterproof elastomeric coating formed by an aqueous dispersion of self-crosslinking acrylic resins by UV rays, pigments and special additives; intended for the protection of all type of materials (concrete, cement, brick, etc...) in which contractions of the facing are expected to cause cracks. also suitable for substrates with cracks that may cause moisture problems. Product available in our Easy-Colours tintometer system.
Additional information
Composition
Product based on watery dispersion of acrylic resins self-crosslinking by UV rays, pigments and special additives.Features and applications
- Great whiteness. Once it gets dry, it forms an impervious to rainwater and a permeable to water vapour film.
- It provides good covering power and excellent resistance to moisture and alkalis.
- It has a magnificent adhesion on the usual construction substrate, whether cement mortars, plaster, plaster, etc.
- Its application achieves washable, waterproof surfaces with low stickiness.
- Great resistance against ageing.
- Great flexibility against substrates contractions with good tensile strength.
This product has a protection against fungus, mould and algae which provides a long-lasting preventive and retardant effect although not permanent. The duration of this affectation depends on the exposure to humidity and the concentration of spores in the area, which create especially favourable conditions for the growth of micro-organisms. Therefore, a periodic preventive maintenance treatment is recommended.
Substrates
NEW CONSTRUCTIONS
- Remove any dust, greases or any other type of dirt.
- A FIJAMOR layer may be convenient diluted with 2-3 parts of water, to fix and equalise the absorption of the substrate.
- Apply the paint according to the instructions given.
OLD CONSTRUCTIONS
- Remove any mould contamination as well as any remaining paint or other construction materials.
- Level any irregularities with a suitable amount of paste.
- Let it dry and sand it.
- A FIJAMOR layer may be convenient diluted with 2-3 parts of water, to fix and equalise the absorption of the substrate.
- Apply the paint according to the instructions given.
Instructions for use
- Shake until perfect homogenisation.
- Apply a first layer diluted in a 5 – 10% of water.
- Apply a second layer without diluting.
APPLICATION TOOLS
- It can be applied using a brush, a roller, an airless spray gun or a pistole.
- Make sure the product has been previously mixed and correctly diluted.
- Tools must be cleaned with abundant water before the paint dries.
Cautions and recommendations
- Do not apply at temperatures below 5ºC.
- Do not apply either with relative humidity greater than 85% or on wet supports.
- Stores in fresh and dry places.
Packaging
4 and 15 L tub.
Shelf life: 1 year in sealed original packaging, sheltered from outside conditions and humidity
Technical data
| ASPECT OF THE DRYED FILM | VALUE | ACCORDING TO NORM |
| Colour | White | |
| Finish | Semi - gloss Matte | UNE-EN 1062-1 |
| Shine 85º | 5,7 | UNE-EN ISO 2813 |
| Chromaticity coordinate L* | 95,8 | UNE 48073 |
| Chromaticity coordinate C* | 0,42 | UNE 48073 |
| Chromaticity coordinate h* | 181,6 | UNE 48073 |
| Whiteness Berger | 90-95 | UNE 48073 |
| Opacity | 95-98% | UNE-EN 13300 |
| Tac residual (G/CM2) | Initial = 0. Post 4hr. U.V. = 0 - | - |
| PHYSICAL PROPERTIES | VALUE | ACCORDING TO NORM |
| Density | 1,37 kg/l | UNE-EN ISO 2811-1 |
| pH | 8,4 | INTERNAL |
| Viscosity | 100 dPas (50 rpm; Husillo R6) | UNE-EN ISO 2555 |
| Dispersion fineness | 20 - 10 microns | UNE-EN ISO 1524 |
| ITS FORMULATION | VALUE | ACCORDING TO NORM |
| Non-volatile matter content | 66% | UNE-EN ISO 3251 |
| Maximum content in COV allowed | 40 g/L | 2004/42/II A classification |
| Maximum content in COV of the product | 40 g/L | 2004/42/II A classification |
| PROPERTIES OF APPLICATION | VALUE | ACCORDING TO NORM |
| Theoretical performance | 4-6 m2/L | UNE 48282 |
| Drying time to touch | 30 Min | UNE 48301 |
| Total drying time | 1 Hour | UNE 48301 |
| Solvent | Water | - |
| First hand dilution | 5-10% | - |
| Second and succesive hands dilution | Without diluting | - |
| Repaint interval | 2-3 hours |
| SOME OTHER SPECIFIC PROPERTIES | VALUE | ACCORDING TO NORM |
| Wet rub resistance | Type 2 | UNE- EN ISO 11998 |
| Elongation | 180-200% | - |
| Resistante to traction | 1,5 N/mm2 | UNE-EN ISO 4624 |
| Permeability to water | V2 | UNE - EN ISO 7783 |
| Permeability to liquid water | W3 | UNE - EN 1062-3 |
| Carbon dioxide (CO2) permeability | Medium Glass | UNE - EN 1062-6 |
Note
The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.