Pavigarden Green Court
PAVIGARDEN GREEN COURT is a polyurethane adhesive of two components without any modification epoxy completely free of water and solvents. ¤ Functions: Pasting of the bands of joints of sheets of artificial turf placed both inside and outside, also in the presence of residual moisture.
Additional information
Substrates
Support must be, previously to the placement of the artificial turf, prepared in compliance with current regulations. In any case it must have the necessary stability and it doesn´t have to be uneven, wavy or bumpy.
Instructions for use
- before proceeding with PAVIGARDEN GREEN COURT application, it is essential to check the chemical composition of the " primary support " (the later part of the turf):
- If the nature of the support is latex apply directly PAVIGARDEN GREEN COURT; if the nature is a type of polyolefin (propylene, PVC, TPO, ECC) applies with a brush or a rag the promoter of adhesion PRYMER O.P., respecting the waiting times.
- Apply PAVIGARDEN GREEN COURT on bands of joint with a serrated spatula n.3-5 in uniform and continuative way, taking into account that useful mixing time is 60 minutes at 20 ° C. At higher temperatures the useful time is shortened significantly.
- In terms of the subsequent placement of synthetic grass leaves follow the instructions of the manufacturer and if it is necessary put the weight on the joints of the lawns to guarantee perfect flatness. The commissioning of the plant requires a wait of 6-7 days.
Cautions and recommendations
Comp. B (Xn)
- It is suspected to produce cancer.
- Harmful in case of inhalation.
- Can cause hurts in the organs after long or repeated exhibitions.
- Causes ocular serious irritation.
- Causes cutaneous irritation.
- Can irritate the respiratory tract.
- Can cause symptoms of allergy or asthma or respiratory difficulties in case of inhalation.
- Can cause an allergic reaction in the skin.
- It contains isocyanates. It may cause an allergic reaction.
- Do not handle the substance before reading and understood all the safety instructions.
- Wear gloves / clothes / goggles / protective mask.
- IF INHALED: If he/she breathes with difficulty, transported the victim to the outside and maintain her/his in a comfortable position for breathing.
- Store in a well-ventilated place. Keep the container tightly closed. Comp.B
Content: DIPHENYLMETHANE-4, 4' - DIISOCYANATE
Technical data
| Relationship of catalysis | 10/1 |
| Colour | Green grass |
| Temperature Application | Between 10° C and + 35° C |
| Application | with serrated spatula No 3-5 |
| Useful life | 1 h (1) |
| Hardening | 24 h. (1) |
| Total hardening | 7 days (1) |
| Performance | 500 GSM linear band of union of 40 cm.of width |
| Cleaning of tools | DILUENT DMC 50 (to fresh adhesive) |
| Storage stability | 1 year (2) |
| Format | 11 kg (10 + 1) |
(1): at 20° C and 65% R.H.
(2): in the original containers closed and maintained at a temperature between + 10° C and + 25° C.
Note
The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.