Paviland^® EP Multicapa

Composition

100% solid two components epoxy resin.

Features and applications

• High mechanical and chemical resistance.
• Easy to apply.
• Anti-slippery system.
• Cladding and sealing layer.
• Wide range of colours.
• Waterproof.
• Food industry: Milk or meet plants, etc.
• Chemical and pharmaceutical industry.
• Laboratories and aseptic rooms.
• Industrial kitchens.
• Logistic areas.
• Garages.
• Manufacturing or storing areas with liquid spillage.
• Hygienic cleaning: non-porous surfaces which are easy to clean.
• Not strong smell.
• Low emission of VOC's.
• Low probability of getting yellowish.

Substrates

• Concrete with suitable resistance ( 25N/mm2 minimum compressive strength and 1,5 N/mm2 resistance to traction) open porous and light roughness. Please consult our technical department for a different type of substrate.
• Substrates must be resistant enough, stable, healthy and clean. Free of dust, release agents, organic products, etc.
• Before applying any product make sure all holes and / or cracks are previously repaired on the substrate by using products from our PAVILAND or MORCEMREST range.
• It is also advisable to carry out a milling or sanding process of the substrate with the main objective of opening the porous and removing any possible adhered materials such as greases, paints, etc.
• The substrate must be completely dried.
• First apply a primer such as Paviland Primer EP or Paviland EP Base ( check the corresponding technical data sheets).

Instructions for use

• Homogenize component A.
• Pour component B on top of component A and mix them with a suitable mixer at low speed, until getting a homogeneous product.
• Spread a first layer using a metal trowel and immediately after sprinkle PAVILAND CUARZO 0,3, PAVILAND CUARZO 0,6 or PAVILAND CUARZO 0,7 arid until almost saturation according to the roughness required.
• Sweep or vacuum the surface 24 hours after the application to remove any spear arid and carry out the original process until getting the thickness required, being 2 to 4 mm the recommended one.
• Apply with a roller, or a rubber trowel a sealing layer using the same product.

Cautions and recommendations

• Do not apply it under 10ºC.
• Do not apply it above 30ºC.
• Do not apply under the risk of frost, rain, heavy wind or direct sun light.
• Use gloves and protective goggles when manipulating the product.
• In case of direct skin or clothes contact, clean the area with abundant water and soap.
• Keep away from children.
• Do not add any water to the mixture. 
• The substrate must be completely dried.
• The product may suffer some colour changes when exposed to direct UV radiation, however, it does not affect its mechanical or chemical features.
• Any equipment and tools will be cleaned with water immediately after being used. 
• Once the product gets hard, it will only be removed by mechanical means. 
• Do not eat or smoke when manipulating the product.
• Empty containers should be removed or thrown according to the current legislation.
• As a consequence of the change in raw materials, the shades of the coloured mortars may vary slightly by batch.

Packaging

20 (15.8+ 4.2) Kg containers.

Store the product in its closed original package, in cool and dry places, away from direct sun light and under 10-30 ºC temperature.

Colour range

RAL 1003, 1015, 3009, 3013, 3020, 5012, 5015, 6001, 6018, 6021, 7001, 7032, 7035, 7037, 7038, 7040, 9005, 9016

Technical data

(Statistic results obtained in standard conditions)

(NOTE: Regarding direct contact with food, PAVILAND EP MULTICAPA is certified according to the global migration requirements stated in the R.D 847/2011, from June 17th, in which the positive list of substances permitted for the manufacture of polymeric materials intended to come into contact with food and EU regulation No. 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food have been stated.

Time of application

Timings are given according to temperatures of 23ºC and 55% relative humidity. Periods of time will be shorter at higher temperatures and longer at lower temperatures.

CE Mark

GRUPO PUMA SL Avd. Agrupación Córdoba, Núm.17 14014 (Córdoba) 18 Nº: 530050
EN 13813 PAVILAND EP MULTICAPA Syntetic resin base colured cladding   SR B2.0 AR0.5 IR14.7 for preparing multiplayer pavements of  2 to 4 mm thickness.
Reaction to fire	Clase Cfl-s1
Hazardous substances emission	SR
Abrassion resistance	AR0.5
Resistance to traction	B2.0
Impact resistance	IR14.7

Note