Additives

Compac Puma

Mortar waterproofer. It improves traditional mortars qualities.

See data sheet


Plasmor

Mixture plasticizer by air occlusion in the mix.

See data sheet


Airemor

Air-entraining and fluxing agent for mortars.

See data sheet


Frimor en

Liquid antifreeze for mortars, chloride-free.

See data sheet


Primers

Impladur

Deep hardening primer to bind substrates prone to disintegrate before applying One-coat Mortars, Cementitious Adhesives, Levelling Mortars, etc.

See data sheet


Impermor

Colourless water-repellent by impregnation and waterproofing which can be used in the treatment of mineral substrates, especially for work finishing’s with mortar façades and natural stone.

See data sheet


Implafix

Adherence primer to promote cement, lime-based mortars and/or plaster-based renders´anchorage on smooth concrete or substrates lacking superficial absorption.

See data sheet


Texturefix-120

TEXTUREFIX-120 is a water-based acrylic and vinyl primer, to be used in construction as a bridge joint between new and old mortar shows good penetration and cohesion capacity due to its particle size and residual tack.
It also improve the conditions for adhesion to the vertical substrate supports, a step that should be taken before applying the covering.

See data sheet


Texturefix Plus

TEXTUREFIX PLUS is a priming product for use in construction as a bonding coat between new and old mortar. It has a good penetration and cohesion capacity due to the size of the particles.It is also capable of improving adhesive conditions on vertical substrates as a prior step to applying facings. Recommended as a bonding agent for paintwork, especially on plaster facings, perlite and old substrates.It also acts as a primer for regulating the absorbency of substrates such as cellular concrete or silico-calcareous brick, suitably treating substrates with high humidity or irregular absorption levels in order to keep the plasterwork uniformly hydrated after plastering. 

See data sheet


Fijamor

Indicated to improve the adhesion of paints, specially on gypsum, perlite or old substrates.

See data sheet


Antisalmor

ANTISALMOR is a water-based product for removing and preventing the appearance of efflorescence caused by saltpeter on typical construction site facings, such as mortar, concrete, brick, fiber cement, natural stone, etc...

See data sheet


Additives and primers miscellaneous

Protecmor

Protects glazed or non glazed ceramic tiles from pigmented stains.
Apply on the surface of the tile avoiding the joints.

See data sheet