Waterproofing sheet of 1 m x 8 m x 4.8 Kg/m2 of bitumen modified with elastomer (APP).  With polyester felt armour, finished on both sides with non-stick polyethylene film. Waterproofing bituminous sheet ideal for waterproofing of roofs type LBM-48-FP. It acts as single and double skin under heavy protection. It serves in turn for water tightness in buried structures and, as lower sheet in gardens’ roofs.


Download technical data sheet


Additional information

Composition

It is composed of polyester felt armour, mast modified with elastomeric finished with non-stick polyethylene film on both sides

Features and applications

  • Single-skin layer system under heavy protection.
  • Double-skin layer system under heavy protection.
  • Double-skin system inferior sheet in open air.
  • Sealing sheet in buried structures.
  • Lowe sheet in green areas covers.

Instructions for use

Place by adhesion by blowtorch.

Cautions and recommendations

  • Not recommended for upper sheet in open air double-skin systems nor for single-skin layers or upper sheet in green areas’ covers.
  • Store in vertical position.
  • Away from open air and humidity. 
  • Do not apply under -5ºC.
  • In general terms, the protection of a waterproofing system should be carried out as soon as possible, especially when dealing with non-adhered solutions, which should be away from open air for at least more than 72 hours.

Packaging

25 rolls per pallet.

Maximum time of storage: 2 years, away from open air at temperatures above +5ºC.

Technical data

TECHNICAL FEATURE NORMA ENSAYO UNIT VALUE
Behaviour against Exterior Fire prEN 13501-5 - Broof(t1)
Reaction to fire EN 13501-1 - E
Water tightness EN 1928 (A) - Pass
Resistance to Longitudinal traction EN 12311-1 N/50 mm 700±200
Resistance to Transversal traction EN 12311-1 N/50 mm 450±150
Elongation to longitudinal break. EN 12311-1 % 35±15
Elongation to transversal break. EN 12311-1 % 35±15
Resistance against roots penetration prEN 13948 - PND
Resistance against aesthetic load EN 12730 Kg ≥15
Impact resistance EN 12691 mm ≥1000
Joint resistance to longitudinal shear EN 12317-1 N/5 cm 450±150
Joint resistance to transversal shear EN 12317-1 N/5 cm 450±150
Ability to fold EN 1109 ºC ≤ -15
Water vapour transmission EN 1931 (m².s.Pa)/Kg 20.000
Fluency resistance EN 1110 ºC ≥120
Dimensional stability EN 1107-1 % ≤0.6
Adhesion of granule EN 12039 % PND
Hazardous substances - - PND

PND: Non determined feature; Pass: Positive; Not Pass. Negative

OTHER ADDITIONAL FEATURES TEST STANDARD UNIT VALUE
Visible defects EN 1850-1 - Non-defective
Mixture EN 1849-1 Kg/m² [4.56-5.28]
Length EN 1848-1 m 8
Width EN 1848-1 m 1
Straightness EN 1848-1 - Pass
Roll surface - 8
Rolls per pallet - - 25