Pumacril Revestimiento Hidropliolite

Features and applications

• Great resistance against ageing.
• Great capacity of colour retention.
• It penetrates the substrate providing a maximum adherence.
• Impervious to rainwater once the application dries.
• Highly resistance to frost.
• Air and water vapour permeability.
• Extraordinary whiteness and opacity.
• Easy to clean.
• Good resistance to the substrate’s alkali Resistant to open air and ultra violet rays.

Instructions for use

• Shake until perfect homogenisation.
• Apply a first diluted layer between 10-15% as primer.
• Dilute the second layer up to 5-10% of water.

NEW CONSTRUCTIONS:

• Remove any possible dust, grease and any other contaminants.
• A FIJAMOR layer may be convenient diluted with 2-3 parts of water, to fix and equalise the absorption of the substrate.
• Apply the paint according to the instructions given.

OLD CONSTRUCTIONS:

• Removes any mould contamination as well as any remaining paint or other construction materials.
• Level any irregularities with a suitable amount of paste. Let it dry and sand it.
• A FIJAMOR layer may be convenient diluted with 2-3 parts of water, to fix and equalise the absorption of the substrate, especially when dealing with dusty or very little cohesive substrates.
• Apply the paint according to the instructions given.

APPLICATION TOOLS

It can be applied using a paint brush, roller or pistole, shaking of the product of respective dilution is required. Tools must be cleaned with abundant water before the paint dries.

Cautions and recommendations

• Do not apply under 5ºC.
• Do not apply the product with relative humidity above the 85% nor on wet substrates.
• Storage: Up to two years in its original closed packaging. In fresh and dry places, away from open air and direct sun light. Avoid extreme weather conditions (not lower to 5ºC nor above 35ºC) 

Packaging

15 litres packaging

Technical data