Morcemcolor® Epoxi

Epoxy antacid two-component mortar for laying and filling of ceramic tiles and mosaics with joints of width between 1 and 15 mm. Resistant to UV rays exposure and weather and climate action.

See data sheet


Morcemcolor® Ultra

High performance coloured grouting mortar with additives and anti-fungi/anti-algae properties. Fast-setting and fast-hardening, anti-efflorescences and water repellent grout mortar with great plasticity for the sealing of joints from 2 to 20 mm. Highly recommended for areas where the applied product is required to be quickly ready to use and ready for traffic. All type of ceramic pieces grouting in intense traffic areas, swimming-pools, floors with radiant heating systems and for its application in areas prone to the growth of microorganism. 

See data sheet


Morcemcolor® Plus Flexible CG2 A W

Very fine and plastic water repelant coloured mortar for grouting 2 to 15 mm joints in all kinds of floor tilings.
Special for grouting low-porosity pieces (porcelain stoneware) and swimming-pools and for the application in areas prone to growth of microorganisms.

See data sheet


Morcemcolor® Extra Fina CG2 A W

Coloured mortar with additives, made of mixed bonding agents.
Great fineness and plasticity.
For grouting up to 4 mm joints in all kinds of floor tilings.
Specially recommended for marble, porcelain stone, rectified and terrazzo.

See data sheet


Morcemcolor® Junta Universal CG2 A W

Coloured mortar with additives, made of mixed bonding agents.
Great fineness and plasticity.
For grouting 2 to 15 mm joints in all kinds of floor tilings.
Special for grouting low-porosity pieces (porcelain stoneware).

See data sheet