Insulation systems mortars

Tradimur® GP

Adhesive mortar for rendering and for fixing insulation materials (glass fibre or rock wool) to walls.
It is rainwater proof and permeable to water vapour, allowing the system to breath. Also a fire-proof system.

See data sheet


Morcem® Panel GP W2

Hydraulic mortar, designed for treating joints and coating panels for exterior walls:–SECUROCK® from USG™–AQUAPANEL® from KNAUF®

See data sheet


Traditerm® system

Traditerm® Flexible

Maximum flexibility mortar, for insulation panels coating (TRADITERM PANEL EPS and TRADITERM PANEL EPS-G) in exterior thermal insulating System TRADITERM® FLEXIBLE, and as cladding reinforcement of OSB type wooden panels. The TRADITERM® FLEXIBLE has excellent impact resistance and is impervious to rainwater. At the same time, it is ideal for use within the external thermal insulation system, is free of cement and is suitable for both indoor and outdoor environments.

See data sheet


Traditerm® Ceramic

Two-component high-performance adhesive for applying ceramic in the TRADITERM CERAMIC (SATE/ETICS) System, certified with DIT (technical approval) No. 605/14. No sagging and excellent initial adhesion. It has a high open time, allowing the rectification of parts. This adhesive mortar for insulation systems is highly deformable

See data sheet


Traditerm® Proyectable

White, monocomponent mortar with high adherence to polystyrene and very low capillary absorption of water, specifically created as an adhesive mortar for expanded polystyrene insulation boards and mineral wool, as a reinforced protecting render and as a substrate for MORCEMDUR ITE in the ETICS sprayable system.
It can be applied with a continuous and non-continuous mortar spraying machine. It may also be applied manually.
The following finishes are accepted:
- RANGE OF MORCEMCRIL
- MORCEMDUR ITE

See data sheet


Traditerm® GP W2

Hydraulic mortar used as an adhesive and covering on expanded polystyrene boards (EPS), expanded polystyrene graphite (EPS-G), mineral wool and natural cork, in the external heat insulation system Traditerm (SATE/ETICS). This mortar, ideal for exterior thermal insulation system, has great adhesion, waterproofing, easy application and does not spread the flame. It is permeable to water vapour.

See data sheet


Traditerm® system accessories

Traditerm® Panel EPS

Thermal insulation panel made of self-extinguishing expanded polystyrene, used in the TRADITERM® external thermal insulation system. The expanded polystyrene panel is used as insulation within the TRADITERM® System both in new and restoration work. Its a light and workable material, also easy to cut. The range of thicknesses provide different levels of thermal insulation. It has an excellent resistance to aging.

See data sheet


Traditerm® Panel EPS G

Improved thermal insulation panel made of self-extinguishing expanded polystyrene, used in the TRADITERM® external thermal insulation system. The expanded polystyrene panel is used as insulation within the TRADITERM® System both in new and restoration work. Its an excellent thermal insulator thanks to its very low conductivity. Its composition makes it a lightweight and workable material. Its range of thicknesses provide different levels of thermal insulation.

See data sheet


Traditerm® Panel Corcho

Natural expanded cork agglomerate used as thermal-acoustic insulation in the Traditerm Nature System (EWI/ETICS), suitable for both new buildings and restoration work. This product is suitable for the TRADITERM® exterior thermal insulation systems. It gives a 100% natural insulation and highly breathable. The range of thicknesses that provide different levels of insulation. Its a light and workable material, also easy to cut.  

See data sheet


Traditerm® Malla

TRADITERM® MALLA consists of double weave threads, essential for reinforcing the TRADITERM® panels. Recommended in the application of TRADITERM® exterior thermal insulation systems. Giving the system greater resistance and stability, and preventing the appearance of cracks caused by temperature differences or movement of the insulation panels. Excellent traction resistance and improves impact resistance.

See data sheet


Traditerm® Malla de Refuerzo

Fiberglass mesh with anti-alkali treatment and double twist threads, which combined with TRADITERM® Mesh, is used as a reinforcement to increase the impact resistance of those areas of the TRADITERM® System exposed to direct knocks. Ideal for reinforcing skirting boards (baseboards). It is fire resistant. TRADITERM® MALLA DE REFUERZO is resistant to cracking. Excellent tensile strenght and great flexiblity. In addition, it has a high resistance to shock.

See data sheet


Traditerm® Perfil arranque aluminio

Starter and protection profile used in the TRADITERM® System. It protect and reinforce the base. Used as a guide for the aligning the insulation panels. It does not rust and its easy to apply. It has a range of thicknesses to choose depending on the thickness of the insulation panel used.

See data sheet


Traditerm® Perfil cierre lateral

Protection and closing profile in External thermal insulation Traditerm Systems (SATE/ETICS). The TRADITERM® PERFIL CIERRE LATERAL protects and reinforces the side finishes of the Systems.TRADITERM® (thermal insulation), does not rust and is easy to install on site. It has a range of thicknesses to be chosen according to the thickness of the insulating panel used.

See data sheet


Traditerm® Perfil Ángulo PVC con Malla

Corner reinforcement profile in perforated PVC, used in the TRADITERM® System. This component of the system is easy to apply. The incorporation of the mesh into the profile, makes it quicker to do the corner and allowing an optimal functioning.

See data sheet


Traditerm® Perfil Angulo Aluminio con Malla

Aluminium perforated reinforcing corner profile, used with the TRADITERM® System. Its easy to apply and the incorporation of the mesh to the profile makes the corner much faster to use.

See data sheet


Traditerm® Perfil Goterón PVC con Malla

Profile for reinforcing and forming guttering in the TRADITERM® thermal insulation system. Its morphology allows a correct evacuation of rainwater on the facade preventing the deterioration of carpentry and the Thermal Insulation System itself from the outside (SATE) in these meetings.

See data sheet


Traditerm® Perfil Ángulo Arco

Used in the Traditerm System. Reinforcing profile for the formation and reinforcement of arcs and circular gaps. Its fast and easy to apply. The profile can be easily folded and adapted to the curvature of the edge that needs to be reinforced. The minimum curvature diameter is 1m.

See data sheet


Traditerm® Perfil Coronación

Protect and reinforce the superior closing profile in External thermal insulation Traditerm Systems (SATE/ETICS). Its easy to apply and does not rust. There is a range of thicknesses to choose depending on the thickness of the insulation panel used.

See data sheet


Traditerm® Perfil Ángulo Circular

PVC profile, designed for corner reinforcement with an angle different to 90ºC in Aislamiento Térmico Exterior Traditerm Systems(SATE/ETICS). Used as corner reinforcement that doesn´t form straight angles. Its easy to apply and the incorporation of the mesh to the profile makes the execution of the corner faster.

See data sheet


Traditerm® Perfil Junta Dilatación

PVC profile with anti-alkaline fibreglass mesh and flexible band for joint treatment. Designed as a solution for expansion and structural joints in the support where the TRADITERM® Exterior Thermal Insulation Systems (SATE/ETICS) is going to be installed.

See data sheet


Traditerm® Perfil Terminación Ventana

Profile for connection and final finishing between the different TRADITERM® (EWI/ETICS) Systems and the existing carpentry on the façade.

See data sheet


Traditerm® Perfil Angulo Arista Viva

PVC profile, designed for corner reinforcement in  external thermal insulation Traditerm Systems(SATE/ETICS). Its easy to apply and the incorporation of the mesh to the profile, makes the execution of the corner faster.

See data sheet


Traditerm® Taco de Anclaje

Anchor used to fasten insulation panels in the TRADITERM® System. Traditerm® Anchor is made of polypropylene and consists of two elements differentiated (nail and sheath). It is a percussion anchorage plug, used to fix the panels insulation in the TRADITERM Exterior Thermal Insulation System. It is easy to apply. It ensures a perfect fixing of the plates to the support. Resistant to oxidation. Wide range of product sizes for correct adaptation to thermal insulation systems depending on the thickness of the plate. European approval according to ETA-08/0172.

 

See data sheet


Traditerm® Taco de Anclaje STR U 2G

Anchor fixings with threaded screw, for fixing TRADITERM® external insulation panels. High quality, secure anchor fixings. As it is a pre-assembled screw, it is easy and quick to install. It ensures a high quality fixing of the insulating panels to the support. With European Certification. Possibility of hidden anchorage in the system. Range of sizes, depending on the thickness of the panel. Use category according to ETA.

See data sheet


Traditerm® Taco de Anclaje STR H

Anchor suitable for wooden substrates with zinc screw. Easy and fast execution. It ensures a fixation
of high quality insulating panels on wooden supports. Possibility of hidden anchorage in the system. Fixing of insulating panels to the External Thermal Insulation System Traditerm®(SATE/ETICS). Permanent contact pressure. Range of sizes, depending on the thickness of the insulating panel to be used.

See data sheet


Traditerm® Anclaje Espiral

Element for fixing light loads of up to 5 kg to the outdoor TRADITERM® thermal insulation system. Polyamide composite. Easy application. Does not generate thermal bridges.

See data sheet


Traditerm® Tornillo SF 300

Screw for mechanically fastening TRADITERM® 300 Mounting. This steel screw ensures that the rigid polyurethane element is fixed at four points, by anchoring this piece to the support, provided that the latter has suitable resistance conditions on its surface for its correct anchorage.

See data sheet


Traditerm® Tapa Aislante EPS-G

Expanded graphite polystyrene cover to fill in the gap left in the insulation panel when TRADITERM® TACO DE ANCLAJE STR U 2G is installed. Levelling of Traditerm®  PANEL EPS-G. Get the TRADITERM® TACO DE ANCLAJE STR U 2G is hidden inside the insulation panel.

See data sheet


Traditerm® Tapa Aislante Lana Mineral

Mineral wool cover to  fill in the gap left in the insulating panel when TRADITERM® TACO DE ANCLAJE STR U 2G is installed. Levelling of the TRADITERM® PANEL MW insulation board. Get the TRADITERM® TACO DE ANCLAJE STR U 2G is hidden inside the insulation panel

See data sheet


Traditerm® Tapa Aislante EPS

Expanded polystyrene cover to  fill in the gap lefts by the corona STR in the insulating panel when TRADITERM® TACO DE ANCLAJE STR U 2G is installed. Levelling of TRADITERM® PANEL EPS. Get the TRADITERM® TACO DE ANCLAJE STR U 2G hidden inside the insulation panel.

 

See data sheet