Repair mortars

Morcemrest® SR 50

Class R4 mono - component high performance repair mortar suitable for large thicknesses.

Formulated with sulphate resisting cement.

See data sheet


Morcemrest® EF 50 R4

High resistance monocomponent R4 repair mortar for large thicknesses.

See data sheet


Morcemrest® Repair

R4 high resistance mono-component mortar for thick applications.
Formulated with Sulfo-resistant cement, selected aggregates and additives; reinforced with fibres.

See data sheet


Morcemrest® MH R4

Self-compacting high-resistance fluid mortar and balanced retraction.

See data sheet


Morcemseal Todo 1

Thixotropic mortar of high strength, with fiber  for concrete  repair and protection , based on nano-silane technology . Classification R4

See data sheet


Morcemrest® C5 R3

One-component, cosmetic R3 repair and surface leveling mortar.

See data sheet


Morcemrest® RF 15 R3

Medium resistant monocomponent R3 reparation mortar.

See data sheet


Morcemrest® RF 35 R3

R3 mono-component medium resistant repair mortar.

See data sheet


Morcem® Rápido R1

Dry mortar. Designed for usual and ordinary masonry applications in which a rapid and high performance mortar is required.

See data sheet


Morcemrest® Obturador

Rapid setting cement prepared. To block water leaks in concrete cracks or fissures on other base-cement surfaces.

See data sheet


Structural reinforcement

Adhesivo Carbotec Impregnante

Carbotec impregnante adhesive is a resin which, due to its impregnation and thixotropy allows the adherence of the carbotec mesh on concrete elements, reinforced concrete or brickwork.

See data sheet


Restoration mortars

Morcemrest® Mur R CSII

Repair mortar for treating rising damp in skirting boards, facilitating the evaporation of water retained in the wall.

See data sheet


Filling and anchorage mortars

Morcem® Grout 500 Plus

High-strength mortar for filling and anchorage of machinery, leveling supports and bridges, etc.Medium and thick layers.

See data sheet


Morcem® Grout 500

High-strength mortar with self-leveling controlled expansion and no retraction.Medium and thick layers.

See data sheet


Morcem® Grout 30

High-strength, self-leveling mortar with no retraction for filling and precision anchorage in thin layers of 5 to 30mm.

See data sheet


Morcem® Geogrout

High-conductivity grout for pumping, injecting and filling in geothermal plant heat exchangers.

See data sheet


Waterproofing

Morcem® Elastic PM

Single component polyurethane elastomeric membrane, liquid application, for waterproofing.

See data sheet


Morcem® Elastic PM Membrana Transparente

Morcem Elastic PM Transparent is a transparent one-component aliphatic polyurethane membrane which is highly elastic with a high solid content and is used for lasting waterproofing of surfaces. This highly technological membrane is UVA stable, does not yellow, is stable to inclement weather, resistant to alkalis and remains transparent and elastic over time. It protects and waterproofs mineral surfaces from the penetration of water, frost, waste and acid rain. It waterproofs damaged glass surfaces and protects the glass fragments in case of breakage. It uses a unique drying system and unlike other systems does not react with moisture and create bubbles.

See data sheet


Morcem® Elastic PM AQUA

Morcem Elastic PM AQUA is a one-component elastic liquid membrane, 100% water-based polyurethane (free from acrylic resins and other additives).
Morcem Elastic PM AQUA forms a seamless, hydrophobic membrane, with no possibility of leaking. 100% waterproof.
Morcem Elastic PM AQUA is based on the innovative technology that permits long-chain polyurethane macromolecules to be incorporated into an aqueous medium, forming stable dispersion.
This technology has high level properties in the base product solvent, which are environmentally friendly.
By being water-based, it has a low VOC content.
 

See data sheet


Morcem® Elastic PM Barniz U.V.

Morcem Elastic PM Varnish U.V. is a one-component, pigmented, aliphatic varnish which is UVA stable, highly elastic, applied and dried cold and used to protect polyurethane membranes. It dries by reacting with the floor and air humidity. It protects effectively, especially if it is given a dark finish. Used on Morcem Elastic PM on surfaces with light pedestrian traffic which require a glossy finish with stable color which does not yellow.

See data sheet


Morcem® Elastic PM Barniz T.R

Morcem Elastic PM Varnish Vehicular Traffic is a one-component polyurethane membrane which is pigmented, colored, semi-rigid, resistant to UVA rays, applied and dried cold and used to protect other waterproof membranes excessively exposed to inclement conditions. It dries by reacting with the floor and air humidity.It can be applied on Morcem Elastic PM, on surfaces which are travelled on a lot and surfaces with light car traffic.

See data sheet


Barniz Morcem® Elastic PM U.V. AQUA

Morcem Elastic PM Varnish U.V. AQUA is a one-component, liquid varnish, 100% water-based polyurethane (free from acrylic resins or other additives), which is UV resistant, colour stable, aliphatic and used as a protective finish for Morcem Elastic PM AQUA.
Morcem Elastic PM Varnish U.V. AQUA is applied over the membrane forming a secure, seamless and long-lasting waterproof coating.
Morcem Elastic PM Varnish U.V. AQUA is based on the innovative technology that permits long-chain polyurethane macromolecules to be incorporated into an aqueous medium, forming stable dispersion.
This technology has the high level properties of solvent-based products whilst being environmentally friendly.
It has a low VOC content due to being a water-based product.

See data sheet


Geotextil PU

GEOTEXTIL PU 100 / 50 g is a non-woven polyester fabric of 100 / 50 grams, developed with “H2O technology”, used for reinforcing “Morcem Cover” systems.

See data sheet


Morcem® Dry F

Bicomponent flexible mortar for concrete waterproofing.

See data sheet


Morcem® Dry SF Plus

Impermeable mortar of two-components additives for the execution of impermeable coatings.

See data sheet


Morcem® Dry SF

Waterproofing mortar. Semi Flexible.

See data sheet


Morcem® Dry R

Mortar with special additives, for watertight cladding jobs.

See data sheet


Morcem® Dry PU

 Morcemdry PU is a two-component semi-elastic cladding of polyurethane free from solvents. It provides polyurethane waterproof elastic claddings of great thickness and great resistance to abrasion and acids / diluted alkali.

See data sheet


Restoration line primers

Implarest® EPW

Two-component water-based epoxy primer/ bonding bridge for preparing damp and dry surfaces.

See data sheet


Implarest® C

Corrosion protection for steel reinforcements from the Morcemrest restoration system, in compliance with EN 1504-7. This product can be combined with other repair mortars from the Morcemrest range. Cementitious anti-corrosion mono-component primer, modified with polymers for protecting reinforcement. When mixed with water a grout is obtained which is applied to the previously cleaned steel. Due to its high pH level Implarest C creates a passivation layer on the surface of the reinforcement, halting the corrosion process. Implarest C is a corrosion protector classified in compliance with EN 1504-7.

See data sheet


Implarest® EP

Epoxy 100% solid, two-component adhesive, specially formulated for bonding new and old concrete. Once mixed a semi-fluid liquid is obtained which may be applied above 10ºC.

See data sheet


Implarest® PU

Implarest PU is a two-component semi-elastic cladding of polyurethane free from solvents. It prepares the surface for the application of water repellent claddings of great thickness and great resistance to abrasion.

See data sheet


Restoration line miscellaneous

Morcemrest® Epoxi T

Two-component thixotropic epoxy adhesive; like multipurpose adhesive for most construction materials; suitable for filling joints, cracks and small holes.

See data sheet


Morcem® Renovex

Product indicated for the regularisation of vertical surfaces with plastic or paint coatings (except for silicates or polyurethanes), concrete, stuccoed walls or mortar or ceramic plastering.

See data sheet


Morcem® Ultra Rápido

Fast-setting binder. Designed as a setting and hardening regulator for making fast-setting mortars with high strength and dimensional stability.

See data sheet


Pumafix TQV

2-component fast curing vinylester injection resin.

See data sheet


Pumafix TQP

Injection resin for anchorage, 2-component and fast curing, resin-based polyester. Styrene-free. Multifunctional, for solid or hollow substrates.

See data sheet


Pumalastic MS

High-performance, one-component, neutral and elastic filler for sealing and bonding.

See data sheet


Pumalastic PU

One-component polyurethane-based filler for sealing or bonding.

See data sheet


Malla Drypool

Morcem®Dry Mesh consists of double weave threads, essential for the reinforcing. 

Recommended in the application of swimming pool waterproofing systems as DryPool. Gives the system great resistance and stability, and prevents  the appearance of cracks caused by temperature differences or movements.

See data sheet