Products that start with I

Colourless water-repellent by impregnation and waterproofing which can be used in the treatment of mineral substrates, especially for work finishing’s with mortar façades and natural stone.

1m x 12m x 3kg/m² non-reinforced membrane made of bitumen with polymer additives, with metallic self-protection, finished with a natural or red color 80 micron embossed aluminum sheet on the outside and non-stick polyethylene film on the inside.Non-reinforced bituminous waterproofing membrane made of bitumen with polymer additives, with metallic self-protection, of the type LA-30/M-NA.

1 m x 10 m x 4 Kg/m2 sheet of polymer-additivated bitumen with polyester felt reinforcement, finished on both sides with non-stick polyethylene film. Waterproofing bituminous sheet of polymer-additivated bitumen type LA-40-FP.

1m x 12m x 3kg/m² membrane made of bitumen with polymer additives, with fiberglass reinforcement, finished with non-stick polyethylene film on both sides.Bituminous waterproofing membrane made of bitumen with polymer additives of the type LA-30-FV.

1m x 10m x 4kg/m² membrane made of bitumen with polymer additives, with fiberglass reinforcement, finished with non-stick polyethylene film on both sides.Bituminous waterproofing membrane made of bitumen with polymer additives of the type LA-40-FV.

Low-viscosity, anionic bituminous emulsion to be applied cold as a primer of surfaces.Officially approved according to standard UNE 104-231 (Type EA) DBI 2282. Fluid product, with a uniform appearance and dark brown colour. Non-toxic, non-flammable product. Good adhesion to wet and dry surfaces. Totally stable and long lasting. Hardens by breaking the emulsion due to the evaporation of water from the continuous phase.

1m x 10m x 4kg/m² plastomer (APP) modified bitumen membrane, with polyester film reinforcement, finished with non-stick polyethylene film on both sides.Bituminous waterproofing membrane of the type LBM-40-FP.

1 m x 10 m x 4 Kg / m2 sheet of modified bitumen with plastometer (APP), with polyester felt reinforcement, finished with non-stick polyethylene film on the inner side and with mineral granule as protective material on the outer side. It acts as a mono-layer and bilayer system under heavy protection. Suitable in turn for tightness in buried structures and bottom sheet in landscaped roof. 

Waterproofing sheet of 1 m x 8 m x 4.8 Kg/m2 of bitumen modified with elastomer (APP).  With polyester felt armour, finished on both sides with non-stick polyethylene film. Waterproofing bituminous sheet ideal for waterproofing of roofs type LBM-48-FP. It acts as single and double skin under heavy protection. It serves in turn for water tightness in buried structures and, as lower sheet in gardens’ roofs.

1m x 10m x 4kg/m² plastomer (APP) modified bitumen membrane, with fiberglass reinforcement, finished with non-stick polyethylene film on both sides.Bituminous waterproofing membrane of the type LBM-40-FV.

1m x 10m x 4kg/m² plastomer (APP) modified bitumen membrane, with fiberglass reinforcement, finished with non-stick polyethylene film on the inside and mineral granule as protective material on the outside.Self-protected bituminous waterproofing membrane of the type LBM-40/G-FV.

Deep hardening primer to bind substrates prone to disintegrate before applying One-coat Mortars, Cementitious Adhesives, Levelling Mortars, etc.

Adherence primer to promote cement, lime-based mortars and/or plaster-based renders´anchorage on smooth concrete or substrates lacking superficial absorption.

Corrosion protection for steel reinforcements from the Morcemrest restoration system, in compliance with EN 1504-7. This product can be combined with other repair mortars from the Morcemrest range. Cementitious anti-corrosion mono-component primer, modified with polymers for protecting reinforcement. When mixed with water a grout is obtained which is applied to the previously cleaned steel. Due to its high pH level Implarest C creates a passivation layer on the surface of the reinforcement, halting the corrosion process. Implarest C is a corrosion protector classified in compliance with EN 1504-7.

Epoxy 100% solid, two-component adhesive, specially formulated for bonding new and old concrete. Once mixed a semi-fluid liquid is obtained which may be applied above 10ºC. It can be used as protection barrier of the steel of the reinforced concrete. It will be applied on the clean reinforcement.

Two-component water-based epoxy primer/ bonding bridge for preparing damp and dry surfaces.

Implarest PU is a two-component semi-elastic cladding of polyurethane free from solvents. It prepares the surface for the application of water repellent claddings of great thickness and great resistance to abrasion.

Anti-rust primer on metallic substrates, by forming an electronic barrier of cathodic protection.