Paviland® ARQ Primer

Synthetic resin that is in use as promoter of adherence and primer fillers on supports of mineral, like cement or ceramic nature. Primer for PAVILAND ARQ systems and NIVELAND and PAVILAND levelling pastes. For indoor and outdoor application. Improves adhesion to the substrate, preventing the loss of water and the formation of bubbles.At the same time, it also improves the waterproofing and durability of the Paviland Arq systems.  Primer for covering pores on mineral supports and concrete surfaces. 

See data sheet


Paviland® Caucho

Crushed rubber from recycled tire, with different sizes and colors. Used for the implementation of continuous and flexible pavement manufactured in situ.

See data sheet


Paviland® Drenante

Dry-mix concrete, intended for highly permeable flooring systems; constitutes an alternative to traditional flooring aesthetics. It reduces and/or prevents the surface flow of rain water or any other type of water by allowing permeation.It complies with Royal Decree 505/2007, of 20 April, which approved the basic conditions of accessibility and non-discrimination of people with disabilities for accessing and using developed public spaces and buildings.Paviland Drainage is free of resins so it does not emit volatile organic compounds that are harmful for the person applying the product and the environment.

See data sheet


Paviland® Fix EP

Two-part epoxy resin-based product with very low viscosity, suitable for bonding fresh concrete or self-levelling mortars to hardened concrete, and hardened concrete to other materials. Its low viscosity makes it ideal for airless application. Very good penetration into the substrate. Suitable for interiors and exteriors.

See data sheet


Paviland® Nature

It is an ecological stabilised soil made of natural aggregates and binders, which give to it their mechanical properties.

See data sheet


Paviland® Primer R

Bonding primer for Self-levelling Cement Systems by Grupo Puma, for interior and exterior use. Its high penetration performance on the substrate helps it to act as a substrate sealant and bonding primer.

See data sheet


Paviland® Pronto 80

Mortar for bases creation with subsequent placement of other coatings such as parquet, carpet, ceramic, etc. Its fast drying feature allows the application of ceramics within 24 hours, as well as the execution of other types of work with notable time savings compared to other conventional mortars. Suitable for pedestrian traffic and underfloor heating, allowing different application thicknesses: between 20 and 40mm for bonded screed, and between 40 and 80 mm for floating screed.

See data sheet


Paviland® Solera Autonivelante

Self-leveling mortar of great fluidity, normal setting and that once hardened creates a screed of great flatness and mechanical resistance. Suitable for interior self-leveling screeds from 10 to 50 mm in adhered screeds and from 50 to 100 mm in floating screeds. Once hardened, it should be covered by discontinuous pavements (ceramic and others). This self-leveling mortar has great leveling capacity, even in large thicknesses. Suitable for interior floor screeds. Radiant heating floors.

See data sheet


Pegoland® CE

Tile adhesive special for its fineness, plasticity and thixotropy for indoor floor tiling and cladding jobs.
Suitable for bonding ceramic tiles with a medium-high adsorption rate.

See data sheet


Pegoland® Classic C1

Tile adhesive. For setting indoor and outdoor ceramic flooring, and indoor walls. Suitable for bonding ceramic tiles with a medium-high absorption rate. Ideal for conventional cement-based substrates. In addition, this cement-based adhesive has good workability and high bond strength.

See data sheet


Pegoland® Dos C2 T

Cementitious adhesive made of mixed binders, non slip. Suitable for interior and exterior pavements, interior claddings and baseboards. Suitable for the placing  for all kind of ceramic pieces, porcelain clay, natural stone, granite and marble. High grip strength, good workability and aging resistance.

See data sheet


Pegoland® Dos Plus C2 TE

Cementitious adhesive for porcelain tiles, ceramic tiles and natural stones, made of mixed binders, fortified with polymers that provides high adherence, non slip  and extended open time. Suitable for interior and exterior pavements, interior claddings and interior and exterior baseboards. Suitable for overlaying new pavements on top of a previous tiled floor. Suitable for installing all types of tiles and natural stones over a wide variety of substrates. Suitable for wall and floor installation in dry and wet areas.

See data sheet


Pegoland® Elastic R2 T

Improved white bicomponent reactive adhesive with excellent flexibility, no vertical sliding, ideal for ceramic tiles, mosaics, natural stones, polycarbonate panels and resin conglomerates. Suitable for interior and exterior areas; for both floors and walls. Excellent workability and optimum water resistance. Suitable for the adhesion of different materials on non traditional supports.

See data sheet


Pegoland® Fix D1

Ready to use adhesive made with resins, and specific additives and agents.
Suitable for fixing any kind of ceramic cladding on vertical interior or exterior substrates. Highly flexible.
Ideal for gluing exhibitions on wood and old tiles. This adhesive is perfect for use on deformable supports.

See data sheet


Pegoland® Fix Plus D2

Ready to use adhesive made with resins, and specific additives and agents. Suitable for fixing any kind of ceramic cladding on vertical interior or exterior substrates. Highly flexible. Ideal for gluing exhibitions on wood and old tiles. This adhesive is perfect for use on deformable supports.

See data sheet


Pegoland® Flex C2 TE S1

Cementitious Tile & Stone adhesive made of mixed bonding agents. High flexibility and adherence. Reduced slipping and extended open time. For indoor and outdoor floor and wall installation of tiles/stones. Specially recommended for tiling façades, large areas and floors with underfloor heating systems. Suitable for bonding all types of porcelain tiles, ceramic tiles and natural stones.

See data sheet


Pegoland® Superflex C2 TE S2

Cementitious adhesive for porcelain tiles, ceramic tiles and natural stones, made of mixed binders, fortified with polymers that provides high adherence, non slip and extended open time, for interior and exterior pavements and claddings. Highly recommended adhesive for the placement of exterior façades, large surface paving and underfloor heating, for very demanding applications or those that require a very flexible product.

See data sheet


Pegoland® Uno C1

Tile adhesive. For setting indoor and outdoor ceramic flooring, and indoor walls. Suitable for bonding ceramic tiles with a medium-high absorption rate. Ideal for conventional cement-based substrates. In addition, this cement-based adhesive has good workability and high bond strength.

See data sheet


Pegoland® Uno Plus C1 TE

Tile adhesive made of mixed bonding agents with reduced sliding and expanded open time, for the placement of all types of ceramic pieces, porcelain tiles, granite and marble parts on interior and exterior pavement and interior coverings. 

See data sheet


Pumablock Mortero adhesivo

Thin-layer adhesive mortar for cellular concrete block manufacturing.

See data sheet


Pumablock Mortero Revestimiento

Coating mortar based on aerial lime. For plastering on cellular concrete blocks with fine scraping, polish or smooth finish.

See data sheet


Pumafix® TQP

Injection resin for anchorage, 2-component and fast curing, resin-based polyester. Styrene-free. Multifunctional, for solid or hollow substrates.

See data sheet


Pumafix® TQV

2-component fast curing vinylester injection resin.

See data sheet


Pumalastic® MS

High-performance, one-component, neutral and elastic filler for sealing and bonding.

See data sheet


Pumalastic® PU

One-component polyurethane-based filler for sealing or bonding.

See data sheet


Search by another letter
A B C F I L M N P R T