Products that start with M

One-component, fibre-reinforced, fast-hardening and drying, waterproofing membrane, endowed with high flexibility and extended open time, for waterproofing and adhesion of tiles on traditional substrates.

Epoxy antacid two-component mortar for laying and filling of ceramic tiles and mosaics with joints of width between 1 and 15 mm. Resistant to UV rays exposure and weather and climate action.

Very fine and plastic water repelant coloured mortar for grouting 2 to 15 mm joints in all kinds of floor tilings.
Special for grouting low-porosity pieces (porcelain stoneware) and swimming-pools and for the application in areas prone to growth of microorganisms.

Additives and coloured mortar of mixed binders endowed with great fineness and plasticity. Suitable for sealing of joints from 2 to 15 mm in all kind of ceramic cladding. Especially suitable for low porosity pieces (ceramic tiles) 

Acrylic render for waterproofing, protection, and decoration of all types of façades and interior surfaces. Decorative render mortar for the Traditerm External Thermal Insulation system (ETICS).

Ready to use synthetic mineral render for waterproofing and decorating façades and indoor walls, especially designed for reinforcing skirting boards (baseboards) in the TRADITERM external thermal insulation system. Outdoor and indoor application. 2.  Decorative finish for the external thermol insulation system TRADITERM®. (ETICS).Formulated with additives that prevents and  delay the apparition of algae and molds.

Matte coating based on acrylic copolymers, indicated for the protection and decoration of façades of any kind of material (concrete, cement, bricks, etc.), providing the substrate with an excellent resistance against any environmental condition. With an excellent finish quality.
Preserves concrete structures from degradation caused by atmospheric agents as well as façades, prefabricated elements, beams, pillars, etc.
 

Waterproof coating with high elasticity based on an aqueous dispersion of self-crosslinking acrylic resins by UV rays, suitable for protection and decoration of all kind of material façades (concrete, cement, brick, etc.) giving the support an excellent resistance to the most thus obtaining a top quality finish and in which contractions of the facing are foreseen that may cause cracks.
Preserves concrete structures from degradation caused by atmospheric agents as well as façades, precast elements, beams, pillars, etc.

Single-component R3 cosmetic repair and surface levelling mortar.

High resistance monocomponent R4 repair mortar for large thicknesses.

Two-component thixotropic epoxy adhesive; like multipurpose adhesive for most construction materials; suitable for filling joints, cracks and small holes.

Self-compacting high-resistance fluid mortar and balanced retraction.

Renovation mortar for the treatment of damp by capillarity on the lower parts of the wall, facilitating the evaporation of water retained in the wall.

Rapid setting cement prepared. To block water leaks in concrete cracks or fissures on other base-cement surfaces.

R4 high resistance mono-component mortar for thick applications.
Formulated with Sulfo-resistant cement, selected aggregates and additives; reinforced with fibres.

R3 mono-component medium resistant repair mortar.

Class R4 mono - component high performance repair mortar suitable for large thicknesses. Formulated with sulphate resisting cement.

High-strength, fast-setting, fibre thixotropic mortar for the repair and protection of concrete, based on nano-silane technology. R4 Classification.

Thixotropic mortar of high strength, with fiber  for concrete  repair and protection , based on nano-silane technology . Classification R4

Cladding mortar based on aerial lime. Suitable for being plastered in a thin layer on top of rough-coating cement mortars. Impervious to rainwater and highly permeable to water vapour.

Dry mortar for plastering and masonry jobs in general.

Dry mortar with special additives, rainwater-proof and permeable to water vapour with the necessary fluidity and time to be applied with a mortar projection pump.

Natural hydraulic-lime mortar for coating.Natural composition, highly breathable.

Natural hydraulic lime smoothing mortar.
Natural composition, highly breathable.

Natural hydraulic lime lining mortar. Natural composition, highly breathable.

Waterproofing mortar. Semi Flexible.

Two component flexible cementitious  waterproofing mortar, with crack  bridging  capacity up to  2 mm, applied by trowel or roller for waterproofing  swimming pools, bathrooms, balconies, and terraces.

Rendering and decoration lime mortar for both interior and exterior walls.

Lime mortar for wall covering and decorating.
Outdoor and indoor.

Coating mortar based on aerial lime.

For power floated concrete or smooth finish on mortar fillings.

Impervious to rainwater and permeable to water vapou

High-conductivity grout for pumping, injecting and filling in geothermal plant heat exchangers.

High-strength mortar with self-leveling controlled expansion and no retraction.Medium and thick layers.

High-strength mortar for filling and anchorage of machinery, leveling supports and bridges, etc.Medium and thick layers.

Dry mortar. Designed for usual and ordinary masonry applications in which a rapid and high performance mortar is required.

Product indicated for the regularisation of vertical surfaces with plastic or paint coatings (except for silicates or polyurethanes), concrete, stuccoed walls or mortar or ceramic plastering.

Demolding liquid with immediate action.
It forms a non-oily film that allows for immediate demolding of concrete cast.

One-coat mortar.
Specially designed for texturing of interior and exterior coatings.
For hand or pump application directly on the brick.
Rainwater proof and permeable to water vapour.
Wide range of decoration possibilities by combination of colours and textures.

Product for protecting coatings based on a pure acrylic resin dispersion which can be used for finishing stamped mortars, protecting them from external agents by sealing the pores.This product, when applied on stamped mortars, improves their characteristics, giving them a uniform appearance.It increases cohesion due to its fine particle size.

Fast-setting binder. Designed as a setting and hardening regulator for making fast-setting mortars with high strength and dimensional stability.